Preventing Trips on the Job

Trips are usually caused by taking shortcuts, poor lighting, clutter in work areas, and loose footing. They often happen when you're in a rush. You can prevent trips by thinking about where you are and where you're going.

Watch for hazards

• Shortcuts. The more shortcuts you take, the greater the chance of tripping. Going off a walkway and cutting through a lawn or driveway to save time may cause you to trip. Carrying a load too big to see over and rushing are also common causes of trips.

• Lighting and clutter hazards. You need correct lighting to keep your balance and see ahead. Common lighting and clutter hazards include leaving the lights off and forgetting to replace burned-out bulbs. Leaving tools, boxes, or other items loose in your work area increases your chances of tripping over something.

Don't take shortcuts

The time a shortcut may save isn't worth an injury. To safely complete your tasks:

• Take the path provided for walkers.

• Make sure you can see where you're going.

• Carry only loads that you can see over.

• Slow down.

Keep work areas well-lit and clean

Your eyes can be your best tool against possible hazards. Be sure to:

• Turn on the lights every time you enter a room.

• Replace light bulbs when they burn out.

• Replace damaged fixtures and cords.

• Keep all work areas and walkways well-lit, clear, and uncluttered.

• If electrical cords are used on a regular basis, install outlets so that cords do not cross walkways. Cover wires and cables that cross walkways